Home / Software Posts / Analysis of Another Automotive Hydraulic Engine Mount

Analysis of Another Automotive Hydraulic Engine Mount

Bentley Expert Profile Image

Bentley Expert

Share

We present particle traces and additional results from the artificial lung analysis discussed in the ADINA System Newsletter of June 2002. Please refer to the Newsletter for additional information about the artificial lung analysis.

lu02a

lung_proto3a

The animation shows how a bolus of particles injected at the fluid inlet of the artificial lung progresses into the lung, through the fiber bundle and out the fluid outlet. ADINA-F is used to compute the steady fluid flow through the artificial lung, and ADINA-PLOT is used to compute the particle traces and create the animation. Note that the particle colors are only used for easy identification of the particles and have no physical significance.

The figure at right shows the residence time distribution of the particles for the period of time shown in the animation. Initially all particles are in the lung, at the fluid inlet. At time 0.2, the first particles enter the fiber bundle. By time 1.0, about 90% of the particles have entered the fiber bundle. (Note that by time 1.0, some of the particles have exited the fiber bundle; this is not shown in the figure.)

This figure is easily obtained from the particle traces shown in the animation using a special ADINA-PLOT command.

Relevant Tags

Every structure has its own unique natural frequency exhibited while disturbed by some external dynamic force. The external dynamic force ...

Each material has unique damping properties. If you want to analyze a structure composed of both steel and concrete you ...

The most common type of retaining wall section is tapered with a stepped pattern. You can model the retaining wall ...