Home / Archives for Software Posts

Software Posts

Software Posts Recent Articles

MicroStation software facilitated SJM Techā€™s successful 3D virtual simulation of two historic Italian mines from more than 200 scanner locations....
Bentley Expert Profile Image

by Bentley Expert

Durante as chuvas fortes de 2022, uma encosta da PR 182 se rompeu. A estrada Ć© a principal conexĆ£o entre Salgado Filho e Flor da Serra do Sul. Ensolo foi chamada para fazer o projeto de contenĆ§Ć£o dessa encosta para...
Felipe De Nadai Profile Image

by Felipe De Nadai

The below animation depicts an axisymmetric model of a mono-tube gas shock absorber, with its schematic beside it. The piston inside the casing pushes its way through the oil (the hydraulic fluid which in reality is a mixture of oil...
Bentley Expert Profile Image

by Bentley Expert

ADINA 8.1 has several enhancements to its cyclic symmetry analysis capabilities. The sparse and iterative solvers can now be used to solve cyclic problems. The primary cyclic component is no longer required to be aligned with the X-Y plane, and...
Bentley Expert Profile Image

by Bentley Expert

In ADINA v. 9.0, we introduced a new graphics engine that enables fast visualization and manipulation of large models in the ADINA User Interface (AUI). Since then, we have continued to make improvements so that FGM supports many more capabilities...

Bentley Expert Profile Image

by Bentley Expert

With a projected cost of GBP 6.8 billion, the Lower Thames Crossing (LTC) is Englandā€™s single largest road investment project since the completion of the M25 more than 30 years ago. The project is unprecedented in size and scale, making...

Bentley Expert Profile Image

by Bentley Expert

A new powerful stiffness matrix stabilization feature will be present in ADINA 8.2 to stabilize static analyses in the presence of physical rigid body modes. The new stabilization technique can be used with or without the modeling features already available...

Bentley Expert Profile Image

by Bentley Expert

This animation shows unsteady flow in chambers connected by valves and a piston. The left chamber has an inlet and the right chamber has an outlet. As the piston moves down, the left valve opens, the right valve closes, and...

Bentley Expert Profile Image

by Bentley Expert

This example shows further results of a helmet impact analysis (courtesy of MET S.p.A., Italy). This time the head and helmet both have an initial speed of 5 m/s and side-impact a rigid anvil. This is one of several impact...

Bentley Expert Profile Image

by Bentley Expert