On the River Ntem in Cameroon’s South Region, the Memve’ele Hydropower Station will have a total installed capacity of 211 megawatts with four single-capacity units of 52.75 megawatts and a water reservoir of 82.71 million cubic meters...
Software Posts
Software Posts Recent Articles
This USD 60 million project involved installation of two offshore wind turbine generators off the Virginia coast. As one of the first offshore jacket substructure wind turbine generator installations in the United States, the project will demonstrate the cost-effectiveness of...
An initiative of the Central Government of India and Central Public Works Department, the National Salt Satyagraha Memorial commemorates Gandhi’s 241-mile journey from Sabarmati to Dandi in 1930....
Skeleton Consultants was commissioned to create a 10-megawatt solar photovoltaic project over the Teesta Canal, though they faced significant site limitations. The rolling terrain and minimal space meant trusses could only be launched from one side of the canal. Their...
The DCO Albany Green Energy Biomass Project is a 50 megawatt, wood-fired renewable power facility capable of generating 425,000 pounds of steam per hour and is primarily used to supply Procter & Gamble with renewable energy....
Qingyuan County produces a large amount of bamboo and wood processing residue. Hangzhou Bole Computer Technology was tasked with implementing a comprehensive BIM design approach, including document and asset management for full lifecycle operation of a biomass direct combustion power...
Located in the Noor Solar Thermal Power Park, the Morocco Noor II is the second phase of a three-phased project that culminates with the installation of a 510-megawatt solar thermal power plant, set to be the world’s single largest solar...
This INR 2.5 million project involved designing a solar panel network for Alaknanda Hospital Varanasi in Uttar Pradesh, India. The panel is a rooftop structure that is 45 feet from ground level and is at a 5-degree incline with an...
Guodian United Power used SACS to design the foundation and support structures. The three-pile jacket-type tidal current set weighed 700 tons. SACS performed modeling, hydrodynamic force calculation, and analysis of working conditions...